SKID
SKID
Nexson Group’s SKID is used for chemical cleaning heat exchangers or cleaning process of materials and equipment when there is a loss in performance, due to obstructions by the fouling of the heat transfert area. Nexson Group offers a solution to save time and money, usually lost during maintenance or replacement of spare parts. This will be done with our compact, autonomous and robust CIP or CTO, which can be supplied with cleaning products intended for titanium and stainless steel.
Our SKID is particularly easy to use since all you need to do is connect the hoses to the exchanger and follow the steps. With our CIP, the heat exchanger quickly regains its performances at a lower cost. Therfore, it allows a quick and economical cleaning solution, without dismantling the heat exchanger.
With our CTO, place the equipment in the appropriate compartment and connect the hoses in the CTO, with the option of connecting external equipment. A pressure test can be performed to check connections. The CTO then fills its tanks with water heated by a resistance heater or steam exchanger
SKID
Nexson Group’s SKID is used for chemical cleaning heat exchangers or cleaning process of materials and equipment when there is a loss in performance, due to obstructions by the fouling of the heat transfert area. Nexson Group offers a solution to save time and money, usually lost during maintenance or replacement of spare parts. This will be done with our compact, autonomous and robust CIP or CTO, which can be supplied with cleaning products intended for titanium and stainless steel.
Our SKID is particularly easy to use since all you need to do is connect the hoses to the exchanger and follow the steps. With our CIP, the heat exchanger quickly regains its performances at a lower cost. Therfore, it allows a quick and economical cleaning solution, without dismantling the heat exchanger.
With our CTO, place the equipment in the appropriate compartment and connect the hoses in the CTO, with the option of connecting external equipment. A pressure test can be performed to check connections. The CTO then fills its tanks with water heated by a resistance heater or steam exchanger
Facilitates the cleaning of your installation
Facilitates the cleaning of your installation
Clean In Place (CIP Module)
How Nexson Group can facilitate the cleaning of your installation whatever the type of exchanger used and help you preserve the thermal characteristics of your heat exchanger.
Nexson Group is your supplier for a large range of clean in place (CIP) units suitable for all types of heat exchangers enabling :
• To keep your process loop always clean
• To less expose your workers to chemicals
• To maintain plant capacity / process availability
• To save time
Connect the CIP module hoses to drains & vents connections, run the CIP process, disconnect the CIP unit. The heat exchanger is back to full performance capacity again.
These CIP modules are also used for process equipment cleaning such as tanks, piping, pumping systems, etc.
Clean In Place (CIP Module)
How Nexson Group can facilitate the cleaning of your installation whatever the type of exchanger used and help you preserve the thermal characteristics of your heat exchanger.
Nexson Group is your supplier for a large range of clean in place (CIP) units suitable for all types of heat exchangers enabling :
• To keep your process loop always clean
• To less expose your workers to chemicals
• To maintain plant capacity / process availability
• To save time
Connect the CIP module hoses to drains & vents connections, run the CIP process, disconnect the CIP unit. The heat exchanger is back to full performance capacity again.
These CIP modules are also used for process equipment cleaning such as tanks, piping, pumping systems, etc.
Cleaning Tools (CTO Module)
The wash cabin is designed to optimize the cleaning process of materials and equipment. Place the equipment in the appropriate compartment and connect the hoses in the
cabin, with the option of connecting external equipment. A pressure test can be performed to check connections. The cabin then fills its tanks with water heated by a resistance heater or steam exchanger.
During the first pre-wash (sludge removal phase), some of this water is evacuated to remove the heaviest dirt. During the wash phase, water recirculates through the compartments with or without detergent, while cross-contamination is avoided thanks to compartment isolation and hygienic design. The wash water is then drained and replaced by clean, cold water for rinsing (rinse phase).
The water recirculation and delivery phases are managed by a PLC with or without HMI adapted to the customer’s specific needs, with automatic or manual routing as required. This automated wash cabin ensures efficient, hygienic cleaning,
perfectly adaptable to each customer’s requirements.
Cleaning Tools (CTO Module)
The wash cabin is designed to optimize the cleaning process of materials and equipment. Place the equipment in the appropriate compartment and connect the hoses in the
cabin, with the option of connecting external equipment. A pressure test can be performed to check connections. The cabin then fills its tanks with water heated by a resistance heater or steam exchanger.
During the first pre-wash (sludge removal phase), some of this water is evacuated to remove the heaviest dirt. During the wash phase, water recirculates through the compartments with or without detergent, while cross-contamination is avoided thanks to compartment isolation and hygienic design. The wash water is then drained and replaced by clean, cold water for rinsing (rinse phase).
The water recirculation and delivery phases are managed by a PLC with or without HMI adapted to the customer’s specific needs, with automatic or manual routing as required. This automated wash cabin ensures efficient, hygienic cleaning,
perfectly adaptable to each customer’s requirements.
Versatile, tailor-made cabin for washing small equipment
Versatile, tailor-made cabin for washing small equipment
Customized for easy cleaning of any installation
Customized for easy cleaning of any installation
Skid Custom
Nexson Group offers a complete range of Clean-in-Place (CIP) modules designed to simplify and optimize the chemical cleaning of all types of heat exchangers, regardless of their design or configuration. These compact, autonomous systems help preserve the thermal efficiency of your installations while minimizing downtime and manual intervention.
Highly adaptable, Nexson CIP units are configured to match the specific requirements of your application whether plate, spiral, plate & shell exchangers, etc. The modular design allows easy integration into your existing process, ensuring effective cleaning without dismantling or exposing operators to chemical risks.
Just connect the CIP module to the exchanger’s drain and vent points, run the cleaning cycle, and disconnect. The exchanger is restored to peak performance with minimal effort.
Beyond heat exchangers, these CIP systems are also suitable for cleaning tanks, piping, pumps, and other process equipment, offering a versatile, safe and time-saving solution for maintaining your entire production line.
By choosing Nexson, you gain a reliable, customizable cleaning solution tailored to your operational needs.
Skid Custom
Nexson Group offers a complete range of Clean-in-Place (CIP) modules designed to simplify and optimize the chemical cleaning of all types of heat exchangers, regardless of their design or configuration. These compact, autonomous systems help preserve the thermal efficiency of your installations while minimizing downtime and manual intervention.
Highly adaptable, Nexson CIP units are configured to match the specific requirements of your application whether plate, spiral, plate & shell exchangers, etc. The modular design allows easy integration into your existing process, ensuring effective cleaning without dismantling or exposing operators to chemical risks.
Just connect the CIP module to the exchanger’s drain and vent points, run the cleaning cycle, and disconnect. The exchanger is restored to peak performance with minimal effort.
Beyond heat exchangers, these CIP systems are also suitable for cleaning tanks, piping, pumps, and other process equipment, offering a versatile, safe and time-saving solution for maintaining your entire production line.
By choosing Nexson, you gain a reliable, customizable cleaning solution tailored to your operational needs.
Main features
Main features
Hot cleaning possible for better efficiency
Maintain plant capacity / process availability
Water and energy savings
Operators protection
Heat exchangers maintenance and spare parts
Heat exchangers maintenance and spare parts
Find all the information you need about maintenance and spare parts for our heat exchangers. We’re committed to providing you with the best possible service and keeping our products as efficient as possible.
CLEAN SKID
CLEAN SKID
To find out more about our heat exchangers, download our brochures!
